OMRON G72C-VID16 Remote Terminal

G72C-VID16の仕様

製品ブランド:オムロン
Part Number: G72C-VID16
G72C-VID16 Input
Rated input voltage: 24 VDC
Input current: 9.7 mA/point
ON delay time: 1.5 ms max.
OFF delay time: 1.5 ms max.
Number of circuits: 16 points (8 points/common)
ON voltage: 15 VDC max.
OFF voltage: 5.6 VDC max.
Insulation method: Photocoupler
Input indication: LEDs (green)
G72C-VOD16 Output
Rated input voltage: 24 VDC
Rated output current: 0.3 A/point, 2.4 A/module
Residual voltage: 1.2 V max.
Leakage current: 100 µA max.
Number of circuits: 16 points (8 points/common)
Insulation method: Photocoupler
Input indication: LEDs (green)

CHARACTERISTICS

Communication system: Two-conductor, half duplex
Synchronization method Asynchronous:
Transmission speed (baud rate): 187.5 kbps (transmission time: 2 ms max. per G72C-V)
Transmission distance: 200 m (total length)
Transmission path: Two-conductor cable (VCTF 0.75 x DPDT recommended)
Interface: RS-485
Operating voltage range: 24 VDC +10%/–15%
Current consumption (See Note): 24 VDC: 200 mA max.
RUN output: SPST-NO contact output (closed during operation)
Contact capacity: 100,000 operations at 2 A, 250 VAC (cosφ = 1)
Diagnostics: Transmission error check (BCC plus inverted two-transmission verification check),
CPU error monitor
Insulation resistance: 20 MΩ min. at 250 VDC
Dielectric strength: 2,000 VAC, 50/60 Hz for 1 min between RUN output circuit and other terminals
500 VAC, 50/60 Hz for 1 min for other terminals
Noise immunity: Noise level: 1.5 kV; pulse width: 100 ns to 1 Ps
Vibration resistance 10 to 55 Hz, 0.75–mm double amplitude for 2 hrs each in X, Y, and Z directions (both mounted
and not mounted to DIN track)
Shock resistance: 50G, 3 times each in X, Y, and Z directions
Ambient temperature: Operating: 0°C to 55°C (32°F to 131°F)
Ambient humidity: Operating: 35% to 85%
Mounting strength: No damage when 5 kgf (4.9 N) pull load was applied for 1 s in all directions
(except for 1 kgf (0.9 N) in direction of rail)
Terminal strength No abnormality when 5 kgf (4.9 N) pull load was applied for 1 s in all directions
Weight: Approx. 380 g
Approvals: UL recognized, File No. E41515; CSA certified, File No. LD31928